Description:
With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.
Features:
- 80W x 2 Continuous power into 8 or 4 Ohms
- Bluetooth A2DP with aptX supported
- MM Phono input
- Analogue line inputs
- SPDIF coax and optical inputs
- Speaker A, Speaker B
- Stereo or Bridge mode configuration
- Preamp/Subwoofer out
- Headphone amplifier
- MDC Slots for future upgrades
- IR Remote
- Smartphone Control App
- 12V Trigger in/out
- IR in/out
- RS-232 Serial port for control
- Control4, Crestron, RTI, URC, AMX, Savant, Elan certified
Preamplifier
Line Input, Pre Out
- THD (20Hz-20kHz)
- <0.005% at 2V out
- Signal/Noise Ratio
- >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
- Channel Separation
- >80dB (1kHz); >70dB (10kHz)
- Input Impedance (R and C)
- 22 kilohm + 100pF
- Maximum Input Signal
- >4.5Vrms (ref. 0.1% THD)
- Output Impedance
- Source Z + 240 Ohm
- Input Sensitivity
- 93mV (ref. 500mV out, Volume maximum)
- Frequency Response
- ±0.03dB (20Hz-20kHz)
- Maximum voltage output – IHF load
- >4.5V (ref. 0.1% THD)
- Tone Controls
- Treble: ±7.0dB at 20kHz
Bass: ±7.0dB at 60Hz
Balance: -10dB
Phono Input, Pre Out
- THD (20Hz-20kHz)
- <0.01% at 2V out
- Signal to Noise Ratio
- >84dB (200 Ohm source; A-weighted, ref. 500mV out)
>76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out) - Input Sensitivity
- 1.44mV (ref. 500mV out, Volume maximum)
- Frequency Response
- ±0.3dB (20Hz-20kHz)
- Maximum Input Signal at 1kHz
- >80mVrms (ref. 0.1% THD)
Line Input, Headphone Out
- THD (20Hz-20kHz)
- <0.005% at 1V out
- Signal/Noise Ratio
- >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
- Frequency Response
- ±0.3dB (20Hz-20kHz)
- Channel Separation
- >60dB at 1kHz
- Output Impedance
- 6 Ohms
General Specifications
- Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)
- >80W (ref. 20-20kHz at rated THD, both channels driven)
- Continuous Output Power into 8 Ohms (Bridge Mode)
- 300W (at 20-20kHz at THD 0.03%)
- THD (20Hz-20kHz)
- <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
- Signal to Noise Ratio
- >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
- Clipping Power
- >95W (at 1kHz 0.1% THD)
- Clipping Power (Bridge Mode)
- >315W (at 1kHz 0.1% THD)
- IHF Dynamic Power
- 8 Ohms 120W
4 Ohms 200W
2 Ohms 250W - IHF Dynamic Power (Bridge Mode)
- 8 Ohms 500W
4 Ohms 560W
Peak Output Current - >20A (in 1 Ohm, 1ms)
- Damping Factor
- >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
- Frequency Response
- ±0.3dB (20Hz-20kHz)
- Channel Separation
- >75dB (1kHz)
>70dB (10kHz) - Input Sensitivity (for 80W in 8 Ohms)
- Line In: 470mV; Digital In: 21% FS
- Sample Rate
- up to 24 bit/192kHz
- Frequency Band
- 2.402G-2.480G
- Maximum Transmit Power (dBm)
- 7dBm ±2dBm
Power Consumption
- at Auto Standby ON and Network Standby OFF
- 0.5 Watts*
- at Auto Standby ON and Network Standby ON
- 1.2 Watts**
- OFF mode (Power switched OFF)
- 0.1 Watts
* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input
NOTE: Bluetooth connectivity is always live when configured
Weight & Dimensions
- Gross Dimensions (W x H x D)*
- 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”
- Net Weight
- 7.8kg (17.2lb)
- Shipping Weight
- 10.1kg (22.3lb)