Overview
With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.
Features
- 80W x 2 Continuous power into 8 or 4 Ohms
- Bluetooth A2DP with aptX supported
- MM Phono input
- Analogue line inputs
- SPDIF coax and optical inputs
- Speaker A, Speaker B
- Stereo or Bridge mode configuration
- Preamp/Subwoofer out
- Headphone amplifier
- MDC Slots for future upgrades
- IR Remote
- Smartphone Control App
- 12V Trigger in/out
- IR in/out
- RS-232 Serial port for control
- Control4, Crestron, RTI, URC, AMX, Savant, Elan certified
Specifications
| LINE IN / PRE OUT |
|
| THD (20Hz-20kHz) | <0.005% at 2V out |
| Signal/Noise Ratio | >106dB (IHF; A-weighted, ref. 500mV out, unity gain) |
| Channel Separation | >80dB (1kHz); >70dB (10kHz) |
| Input Impedance (R and C) | 22 kilohm + 100pF |
| Maximum Input Signal | >4.5Vrms (ref. 0.1% THD) |
| Output Impedance | Source Z + 240 Ohm |
| Input Sensitivity | 93mV (ref. 500mV out, Volume maximum) |
| Frequency Response | ±0.03dB (20Hz-20kHz) |
| Maximum voltage output – IHF load | >4.5V (ref. 0.1% THD) |
| Tone Controls |
Treble:±7.0dB at 20kHz Bass: ±7.0dB at 60Hz Balance: -10dB |
| PHONO IN / PRE OUT | |
| THD (20Hz-20kHz) | <0.01% at 2V out |
| Signal to Noise Ratio |
>84dB (200 Ohm source; A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out) |
| Input Sensitivity | 1.44mV (ref. 500mV out, Volume maximum) |
| Frequency Response | ±0.3dB (20Hz-20kHz) |
| Maximum Input Signal at 1kHz | >80mVrms (ref. 0.1% THD) |
| LINE IN / HEADPHONE OUT | |
| THD (20Hz-20kHz) | <0.005% at 1V out |
| Signal/Noise Ratio | >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain) |
| Frequency Response | ±0.3dB (20Hz-20kHz) |
| Channel Separation | >60dB at 1kHz |
| Output Impedance | 6 Ohms |
| LINE IN / SPEAKER OUT | |
| Continuous Output Power into 4 Ohms and 8 Ohms (Stereo) | >80W (ref. 20-20kHz at rated THD, both channels driven) |
| Continuous Output Power into 8 Ohms (Bridge Mode) | 300W (at 20-20kHz at THD 0.03%) |
| THD (20Hz-20kHz) | <0.03% (250mW to 80W, 8 Ohms and 4 Ohms) |
| Signal to Noise Ratio | >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms) |
| Clipping Power | >95W (at 1kHz 0.1% THD) |
| Clipping Power (Bridge Mode) | >315W (at 1kHz 0.1% THD) |
| IHF Dynamic Power |
8 Ohms 120W 4 Ohms 200W 2 Ohms 250W |
| IHF Dynamic Power (Bridge Mode) |
8 Ohms 500W 4 Ohms 560W |
| Peak Output Current | >20A (in 1 Ohm, 1ms) |
| Damping Factor | >300 (ref. 8 Ohms, 20Hz and 6.5kHz) |
| Frequency Response | ±0.3dB (20Hz-20kHz) |
| Channel Separation |
>75dB (1kHz) >70dB (10kHz) |
| Input Sensitivity (for 80W in 8 Ohms) | Line In: 470mV; Digital In: 21% FS |
| Sample Rate | up to 24 bit/192kHz |
| Wireless Frequency Band | 2.402G-2.480G |
| Wireless Maximum Transmit Power (dBm) | 7dBm ±2dBm |
| Power Consumption |
Auto Standby ON and Network Standby OFF - 0.5W Auto Standby ON and Network Standby ON - 1.2W OFF mode (Power switched OFF) - 0.1W |
| Gross Dimensions (W x H x D) | 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)” |
| Net Weight | 7.8kg (17.2lb) |
| Shipping Weight | 10.1kg (22.3lb) |