TW AD-7300 2.0 Version - 7 channel Amp 7X300W@8Ω

  • Sale
  • Regular price $1,899.00


The New Tone Winner AD-7300+ Series Monster Amp - Available Now ! Oh Yessss With Free Shipping.


www.summithifi.com ( Canada )

www.summithifiusa.com ( USA )

 

Audio Specifications: 120 Volts Test Results:

  • Topology: Fully discrete, dual differential, high current, short signal path Class A/B - Class "H" power supply.
  • Numbers of Channel: 7 Channels - High powered single channel modules.
  • Power Output: ( Rated Power; THD <0.1% @ 120V (Tested @ AC 120V) - (AC 240V Will Increase the output wattage and maintain the THD<0.1%.)
  • 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
  • 507 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 4 Ohms; one channel driven.
  • 266 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
  • 434 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
  • 180 watts RMS/channel; THD<0.1%; 8 Ohms; all Seven channels driven.

Audio Specifications: 240 Volts Test Results:

  • Topology: Fully discrete, dual differential, high current, short signal path Class A/B - Class "H" power supply.
  • Numbers of Channel: 7 Channels - High powered single channel modules.
  • Power Output: ( Rated Power; THD <0.1% @ 240V (Tested @ AC 240V) - (AC 240V Will Increase the output wattage and maintain the THD<0.1%.)
  • 324 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
  • 584 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 4 Ohms; one channel driven.
  • 307 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
  • 500 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
  • 190+ watts RMS/channel; THD<0.1%; 8 Ohms; all Seven channels driven.


  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
  • Broad-Band Frequency Response: 10 Hz to 70 kHz +0/-2 dB.
  • THD + noise: < 0.006%; at 100 watts RMS; 1 kHz; 8 Ohms.
  • Signal to Noise Ratio (8 Ohm load):
  • > 106 dB; ref FTC rated power; unbalanced input (A-weighted).
  • > 91 dB; ref 1 watt; unbalanced input (A-weighted).
  • Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
  • Damping Factor (8 Ohm load): > 149.
  • Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.
  • Gain: 28 dB.
  • Maximum Power Consumption: 2056 watts at 120V & 1128W at 240V
  • Power Supply: 110V-240V- 15 Amps-20 Amps Auto Switching Class "H"Power Supply.
  • Material: Aluminum
  • Modules: Separate Heatsinks for individual modules. 
  • Color: Black
  • Front Panel: Analogue meter with blue LED lights and Red Needle. 
  • G.W: 26.3KGS ( 57.98 Lb)
  • Unit size: 17.48 L X 17.32 W X 7.76 H Inches
  • Package size:22.52 L X 22.52 W X 12.64 H Inches
  • Accessories: 120 Volts - 15 Amp Power cord cable Included
  • Warranty: 2 years warranty

Customer Reviews

Based on 94 reviews
99%
(93)
0%
(0)
1%
(1)
0%
(0)
0%
(0)
D
David Macks
Amazing Difference Right Off the Bat!

I've been in the Home Theatre game almost since it's inception. After a long time I decided to move on from my 13 year old Onkyo TXNR 5010 which had served me long and well. That receiver was truly amazing and had gobs of power and it really shined in 2 channel applications. I was finally able to get my hand on new Onkyo RZ50. While this receiver had tons of features and is relative future proof, I found that my speakers just didn't "sing" so I started looking into adding separate amplification to my HT setup. After much research I chose to go with Tone winner AD 5180 but found that it was out of stock.

Amir offered me a deal on the 7 channel AD-7300 2.0 and I took it. After wrestling the beast into my HT setup I was amazed at the added punch and clarity that the amp unlocked in my system. I'm currently running ADS 1290's as my mains with Ohm Walsh 2's as my rears. Not exactly state of the art speakers and not easy to drive either however the AD-7300 has brought new life to both video and 2 channel audio. I've yet to run DIRAC on my system I've been too busy enjoying everything with just a manual calibration. I can safely say that this amp is the smartest purchase I've made in years and it will stay in my system probably long after the RZ-50 is gone.

K
Khassim Konate

TW AD-7300 2.0 Version - 7 channel Amp 7X300W@8Ω

S
Stewart Sokoloski
Just what I was looking for!

Thanks Summit!
Made my old AVR something new! Vibrant Sounds completely filled my room!

P
Phillip Grant
Great Amplifier for my theater room.

As soon as I hooked it up I noticed an immediate improvement listening to 2 channel music. I had been using my Denon AVR 4310ci since 2008 which I am very happy with at 130wpc into 8ohms. I purchased Tekton Design DI SEs for my LCR which are rated at 4ohms rated to handle 500rms. last year and had been wanting to add an external amp since. I am so glad people are talking about this amp and how great it is especially at the price point. I'm currently driving 5 speakers with this amp and hope to upgrade to a 7.1 system soon. For movies it adds more separation in each channel and you can hear and feel the power it's providing. I have been re-watching and listening to my music and movies since I got it and have been impressed.

F
Foy Lu
Love my product, item as described! Very happy

Very happy w/ this Amp I purchased. Amp as described, very powerful which I absolutely love!