Description:
With the addition of the PP 4 to your home system, the LPs you cherish the most come alive in the form of expansive and rich sound. Offering superb and measured sonic performance, NAD combines two simple solutions – the PP 4 Digital Phono and the USB Preamplifier – into one small device, making it easy to add phono to stereo amplifiers and AV receivers without a phono input. The PP 4 uses a shielded USB cable and recording level control, which reduces noise and improves the analogue-to-digital conversion process. As part of NAD’s commitment to the environment, the PP 4 features a more efficient “green” power supply that reduces power consumption. It also has an Auto Power Down feature that saves energy by shutting off when not in use.
Features:
MC
- Input Impedance (R and C)
- 100 Ohm + 180pF
- Gain at 1kHz
- 58dB
- Input sensitivity (ref. 200mV output)
- 0.38mV
- Signal to noise (A weighted, with cartridge connected)
- 78dB
- Input overload (20Hz/1kHz/20kHz)
- 0.65/6.5/60mV
- Rated Distortion (THD 20Hz – 20kHz)
- <0.03%
- RIAA response accuracy
- ±0.3dB
- Infrasonic filter
- -14dB (5Hz)
- -3dB (10Hz)
- Digital output (USB)
- 16 bit linear PCM
- Sampling frequency
- 48kHz
- Dynamic range
- 86dB
MM
- Input Impedance (R and C)
- 47 kilohm + 200pF
- Gain at 1kHz
- 35dB
- Input sensitivity (ref. 200mV output)
- 5mV
- Signal to noise (A weighted, with cartridge connected)
- 76dB
- Input overload (20Hz/1kHz/20kHz)
- 10/100/900mV
- Rated Distortion (THD 20Hz – 20kHz)
- <0.03%
- RIAA response accuracy
- ±0.3dB
- Infrasonic filter
- -14dB (5Hz)
- -3dB (10Hz)
- Digital output (USB)
- 16 bit linear PCM
- Sampling Frequency
- 48kHz
- Dynamic range
- 89dB
- Record Level
- 0dB to -6dB
- Gross Dimensions excl. Power supply (W x H x D)*
- 135 x 49 x 72mm
5 5/16 x 1 15/16 x 2 7/8″**
Line In
- Input Impedance
- 47 kilohm + 180pF
- Rated Distortion (THD 20Hz – 20kHz)
- <0.008%
- Signal to noise, A weighted
- -115dB
- Maximum Input Level
- 5.3V
Line Out
- Output Impedance
- 100 Ohm
- Maximum Output Level
- 5.3V